Chemical Bonding Study Guide: Ionic, Covalent, and Metallic Bonds with Lewis Structure Practice
chemistrychemical bondsLewis structuresionic bondscovalent bondsmetallic bondingpractice problems

Chemical Bonding Study Guide: Ionic, Covalent, and Metallic Bonds with Lewis Structure Practice

SStudy Science Editorial Team
2026-11-20
6 min read

Learn to classify ionic, covalent, and metallic bonds and draw accurate Lewis structures with a practical chemistry checklist.

This chemical bonding study guide gives you a repeatable way to identify ionic, covalent, and metallic bonds, draw Lewis structures, check formal charges, and correct the errors that most often appear in chemistry homework and tests.

Overview

Chemical bonds describe how atoms interact using their valence electrons, the electrons in the outermost occupied energy level. The three broad bonding models are ionic, covalent, and metallic. In an ionic bond, electrons are transferred and oppositely charged ions attract one another. In a covalent bond, atoms share electron pairs. In a metallic bond, metal atoms contribute valence electrons to a mobile, shared electron system.

These categories are useful models, but real bonds can have varying degrees of polarity and electron sharing. For introductory chemistry problems, begin by identifying the elements involved and then apply the model that best fits the substance.

Bond typeWhat happens to electrons?Common propertiesExamples
IonicElectrons are transferred, usually from a metal to a nonmetal.Often crystalline solids with high melting points; conduct electricity when molten or dissolved.NaCl, MgO, CaF2
CovalentElectrons are shared between nonmetal atoms or within polyatomic ions.Often form molecules; properties vary widely with structure and polarity.H2O, CO2, NH3
MetallicValence electrons are delocalized across many metal atoms.Usually conductive, malleable, and ductile.Cu, Al, Fe

Lewis structures are mainly used for covalent molecules and polyatomic ions. They show valence electrons as dots and shared pairs as lines. One line represents one shared pair, or two electrons. A complete Lewis structure is not the same as a three-dimensional molecular shape; after drawing it, you may still need to determine its geometry and polarity.

Checklist by scenario

When classifying an unfamiliar compound

  1. Identify whether each element is a metal, nonmetal, or metalloid using the periodic table.
  2. Classify a metal combined with a nonmetal as primarily ionic for introductory problems.
  3. Classify a combination of nonmetals as primarily covalent.
  4. Classify a sample made from metal atoms as metallic, especially when discussing conductivity, ductility, or malleability.
  5. Check the formula for a polyatomic ion. A compound such as NaNO3 contains ionic attraction between Na+ and NO3−, but covalent bonds within the nitrate ion.

Do not use a single electronegativity rule as a substitute for understanding the formula. If your class uses electronegativity differences to distinguish nonpolar covalent, polar covalent, and ionic bonding, follow the cutoff values provided by your instructor or textbook because conventions can differ.

When drawing a Lewis structure for a neutral molecule

  1. Count valence electrons. Add the valence electrons supplied by every atom. Use the group number as a starting point for main-group elements.
  2. Adjust for charge. Add one electron for each negative charge and remove one electron for each positive charge.
  3. Choose a central atom. Hydrogen is never central. The less electronegative atom is often central, while halogens commonly occupy terminal positions. Carbon is frequently central when it is present.
  4. Connect atoms with single bonds. Each single bond uses two electrons.
  5. Complete terminal octets. Place remaining electrons around the outside atoms first. Hydrogen needs only two electrons.
  6. Place leftover electrons on the central atom. If the central atom still lacks an octet, convert lone pairs on neighboring atoms into double or triple bonds where appropriate.
  7. Check the total. Count every dot and every line. The number must match the original valence-electron total.

When drawing a Lewis structure for an ion

Place the completed structure in square brackets and write the overall charge outside the brackets. For example, a negative polyatomic ion receives additional electrons before the octets are completed. A positive ion loses electrons. Always verify both the electron count and the charge shown on the finished structure.

When deciding between possible structures

Calculate formal charge for each atom using this expression:

Formal charge = valence electrons − nonbonding electrons − one-half of bonding electrons

Prefer structures with small formal charges when reasonable, place negative formal charge on the more electronegative atom when possible, and check whether the formal charges add to the overall molecular or ionic charge. Some species have resonance structures: more than one valid Lewis structure differs only in the placement of electrons, not in the positions of the atoms.

What to double-check

  • Electron total: Recount dots and bonding lines. A line counts as two electrons.
  • Hydrogen: Confirm that each hydrogen has one bond and two shared electrons, not an octet.
  • Octet exceptions: Some elements in the third period and beyond may accommodate more than eight electrons. Beryllium and boron can appear with fewer than eight in certain introductory examples. Treat these as exceptions only when the formula and electron count support them.
  • Charge: For ions, use brackets and write the charge clearly. The sum of formal charges must equal the ion's charge.
  • Central atom: Avoid placing a halogen or hydrogen in the center unless the structure specifically requires it.
  • Bond order: A single, double, or triple bond changes the number of shared electrons and affects formal-charge calculations.
  • Structure versus shape: A Lewis drawing shows connectivity and valence electrons. It does not by itself show bond angles or the full three-dimensional arrangement.

For a useful chemistry review routine, combine structure practice with mole and formula work. The stoichiometry practice guide can help you connect chemical formulas to mole ratios after you have identified the atoms and ions in a compound.

Common mistakes

Confusing transfer with sharing: Ionic bonding is modeled as electron transfer followed by attraction between ions. Covalent bonding is modeled as shared electron pairs. Do not describe a covalent molecule as a collection of separate positive and negative ions unless the problem specifically concerns a polar bond or partial charges.

Forgetting the charge adjustment: A frequent Lewis-structure error is using the neutral-atom electron total for an ion. Write the charge at the top of your work before counting.

Stopping after single bonds: Single bonds may leave the central atom short of an octet. Complete terminal atoms first, then inspect the central atom and consider multiple bonds.

Adding electrons to fix every problem: If the central atom lacks an octet, do not add random dots. Recheck the total and consider whether a lone pair should become a multiple bond.

Ignoring the formula's subscripts: A subscript applies to the element immediately before it. Count every atom in the formula before beginning. This is particularly important for compounds containing parentheses and polyatomic ions.

When to revisit

Use this checklist before a bonding quiz, after learning polyatomic ions, and whenever a practice problem introduces a new type of molecule or ion. Revisit it during a broader chemistry review if you are mixing up valence electrons, formal charge, molecular shape, or polarity. A short return session is more effective when it includes new examples rather than copying a familiar structure.

For a practical study cycle, choose three examples: one ionic compound, one neutral covalent molecule, and one polyatomic ion. Classify each, count its valence electrons, draw the structure, calculate formal charges, and explain one property using the bonding model. Then compare your work with your class notes and correct only the step that failed. The semester science study plan template can help place these short practice sets into a repeatable review schedule.

Finally, revisit the guide when your course changes notation or introduces exceptions. Keep a personal error list with entries such as missed charge, incorrect central atom, incomplete octet, or wrong electron total. Before the next test, solve one fresh structure without looking at the checklist, then use the checklist to audit your result.

Related Topics

#chemistry#chemical bonds#Lewis structures#ionic bonds#covalent bonds#metallic bonding#practice problems
S

Study Science Editorial Team

Science Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.